lang lang lang lang lang lang lang
000095

Push-Pull Prop

Push-Pull Prop dopphoto dopphoto dopphoto dopphoto dopphoto
Short information
The push-pull prop is an accessory used for the installation of formwork in a cast-in-situ concrete construction. The push-pull prop provides stability and keeps the panels of the formwork system in an upright position. The push-pull prop is an auxiliary element and can not be us ...
Basic
specifications
Weight, kg
20,6 кг
Nominal length of the top jack
1950-2550 мм
Lower jack nominal length
1150-1750 мм
Length adjustment
винтовая
Product description

The push-pull prop is an accessory used for the installation of formwork in a cast-in-situ concrete construction. The push-pull prop provides stability and keeps the panels of the formwork system in an upright position. The push-pull prop is an auxiliary element and can not be used without tightening elements of the formwork itself. The push-pull prop consists of two bases/supports - the upper one and the lower one. The lower support rests on the panel and is fixed with an anchor. The upper support is fixed at the top of the panel. The sliding screw part of the supports is adjusted so that an angle of no more than 60° is formed between the push-pull prop and the panel. In addition, the push-pull prop is fixed at one point on the ground or on another surface.

Technical specifications: Nominal length of the upper jack: 1950-2550 mm; - Nominal length of the lower jack: 1150-1750 mm; - Length adjustment: screw; - Weight: 20.6 kg

Required fields